Ingeteam
9.3.2. INGECON SUN 3Play TL M
1.
Remove the caps from the quick connectors.
2.
Insert the MPPT1 string 1 connectors respecting the polarities indicated on the lower connections plate
of the unit.
3.
Ensure the connections are firm.
4.
Turn the DC switch to ON.
5.
Check that at least one of the unit's display LED blinks. Otherwise, check the polarity of the connectors,
turn the DC switch OFF and fix it.
6.
Turn the DC switch to OFF.
7.
In INGECON SUN 3Play TL M, using the right tool, disconnect the MPPT1 string 1 connectors.
8.
In INGECON SUN 3Play TL M, repeat steps 2 to 6, with the MPPT2 string 1.
9.
Connect the remaining connectors according to the polarities.
96
ABO2011IQM01_C - Installation and Operation Manual
DC connection