Güde GF 180 Mode D'emploi page 7

GB
A.V. 2
Additional copies, even if only extracts, are subject to approval. The right to technical changes reserved.
Have you any technical queries? A claim? Do you need spare parts or a Manual?
You can find our quick and non-bureaucratic help on our home page
you our help. We need to know the production number, number of the assortment item and production year so that we may identify your
GB
possible claim. All these data can be found on the type label. Please record these data below so that they may always be available.
Production number:_________________________Assortment item number:___________________________Production year___________
Tel.: +49 (0) 79 04 / 700-360
Marking:
Product safety, prohibitons:
The product is in compliancec
with the relevant EC standards
Prohibitions:
Do not intervene into cutting disk
Prohibitions, Warning:
Warning! Dangerous place!
Orders:
Read the Manual
Environment Protection:
Do not put the waste in the
environment, do dispose it in due
manner
Defective electric or electronic
devices or devices to be disposed
of shall be handed over to the
recycling establishments duly
equipped for this purpose
Please read carefully this manual before putting the advice into operation.
Fax:
Do not immerse the product.
Keep off the reach of children
Warning against dangerous
electric voltage
Use protection earphones and
eye protectors
Cardboard packing material can
be handed over to the recycling
establishments duly equipped
for this purpose
Der Grüne Punkt –Duales
System Deutschland AG
www.guede.com in the field of Service. Please help us in providing
+49 (0) 79 04 / 700-51999
Packing:
Protect against moisture
Device
GF 180 MACHINE FOR CUTTING THE TILES
Scope of Delivery, (Fig. A)
1. Protection cover
2. Table
3. Scale
4. Parallel rabbet
5. Setting supports
6. On/off switch
7. Tommy screw on parallel rabbet
8. Vessel for water
9. Tommy screw for table adjusting
GB
Declaration of Conformity with the
EC Regulations
We, Güde GmbH & Co. KG Birkichstraße 6, 74549
Wolpertshausen, Germany, declare herewith that the concept and
construction as well as the execution that has been put into
circulation of the below marked device are in compliance with the
relevant basic requirements of the EC regulations on safety and
health protection.
Thie validity of this Declaration expires should the devices be
changed without our consent.
Marking of the devices:
GF 180 DEVICE FOR TILE CUTTING
Assortment item No.: 55410
Date/Signature of the Manufacturer:
03.06.2008
Data about the signator: Mr. Arnold, Director of
the Company
Corresponding EC Regulations::
Maschinenrichtlinie 98/37/EG
[Machine Regulations 98/37/EG]
EG-Niederspannungsrichtlinie 73/23/EEC-93/68/EEC
[EC Regulations for low voltage 73/23/EEC-93/68/EEC]
Elektromagnetische Verträglichkeit 89/336/EEC
[Electromagnetic Compatibility 89/336/EEC]
(RoHS) 2002/95/EC
[(RoHS) 2002/95/EC]
Applied Harmonized Standards:
EN 61000-3-2/A2:2000, EN 61000-3-3/A1:2001
EN 55014-1/A2:2002, EN 55014-2/A1:2001, 61029-1/A12:2003
Certifying Body:
TÜV Product Safety s.r.o. TÜV Süd Gruppe, ul. Ridlerstraße 65,
80339 Munich, Germany
E-mail: support@ts.guede.com
Orientation of packing. The top