TOOLCRAFT 2331524 Notice D'emploi page 61

k) Additive measurement
• Use the left or right arrow buttons (5 or 8) to select the symbol for the additive
measurement function.
Press the ON / DIST / OK button (6) to confirm. The
•
in the lower-left corner of the LCD display (10) after switching. The additive
measurement function is now enabled.
• Measure the first line.
• Measure the second line.
• The measured values will be added together and the sum will be displayed in
the bottom row (main value display (E)).
• The additive measurement can be repeated as often as desired.
• Press the C/OFF button (7) to delete the values.
l) Subtractive measurement
• Use the left or right arrow buttons (5 or 8) to select the symbol for the subtractive
measurement function. The
LCD display (10) after switching.
• Measure the first line.
• Measure the second line.
• The measured values will be subtracted and the difference will be displayed in
the bottom row (main value display (E)).
Press the C/OFF button (7) to delete the values. The subtractive measurement
•
can be repeated as often as desired.
m) Surface area measurements
• Use the left or right arrow buttons (5 or 8) to select the symbol for the surface
area measurement function. Press the ON / DIST / OK button (6) to confirm.
The symbol will appear in the lower-left corner of the LCD display (10) after
switching.
• Measure the two side lengths of a surface at right angles to each other.
• The device will automatically multiply the measured values and display the
result in the main value display (E).
symbol will appear in the lower-left corner of the
symbol will appear
61