Burg Wächter BURGprotect BASE 2200 Notice D'installation Et D'utilisation page 35

Home Scenario
Advanced settings
Coming Home delay:
Users can configure a delay time where the
system does not trigger an alarm, even if
a sensor detects an event, e.g. in order to
be able to enter the code on the keypad
without the alarm being triggered.
Leaving Home delay:
The system delays the armed / Home
Scenario of the system by the time entered.
E.g. to allow you to leave the garage before
the system changes its status.
Alarm siren duration:
Specifies how long the sirens should remain
switched on in event of an alarm. Legal
provisions apply. Please contact your local
authorities / town hall for information.
Network & password setting:
Here you can manage the system settings for
network and access password.
Add user
To share access to the system with other
users, you can generate a QR code that is
valid for a limited period.
[Device Setup]-[Share device] Generates a
one-time QR code that is valid for a limited
period. After installing the App, users can
scan in this code or import it from the photo
album in order to gain access to the system.
Thus, sharing via chat programmes or MMS
is very easy.
BASE 2200 English | 35
BURGprotect_BASE 2200_03-2019_03.indd 35 10.04.2019 16:24:3