Burg Wächter BURGprotect BASE 2200 Notice D'installation Et D'utilisation page 24

Commissioning
1. Download the "BURGprotect" App
Search for the App "BURGprotect" in the
Android Play Store or iOS App Store. Install
the App after successful download.
2. Switch on
Connect the device using the power supply
contained in the scope of supply and insert
this into a socket. Now switch on the
BURGprotect BASE. For this purpose, open
the battery compartment at the rear and
slide the switch to the "on" position. A
beeping tone sounds approx. one minute
after switching on and the LED status display
starts to flash.
3. Connect your Smart Device
with the BASE
Preparation:
• Have your router WLAN password ready.
• Make sure that your router has an active
connection to the internet.
Open the WLAN menu of your Smart
Device and search for available networks.
Connect your Smart Device with the network
"burg_xxxxx".
The default password is 1234567890
24 | English
BURGprotect_BASE 2200_03-2019_03.indd 24
BASE 2200
10.04.2019 16:24:3