Options And Accessories - Hatco GLO-RAY Manuel D'installation Et D'utilisation

OPTIONS AND ACCESSORIES

Box Ribbon
The following hardcoated box ribbons are available as
accessories to hold french fry boxes. The five and eight pleat
ribbons can be installed on the right or left side of the fry pan.
Four Pleat Fry Box Ribbon (GRFHS-16 and -26)
Five Pleat French Fry Box Ribbon (GRFHS-22 and -26)
Five Pleat Fry Box Ribbon (GRFHS-21)
Eight Pleat Fry Box Ribbon (GRFHS-PTT21 and -PT26)
Four Pleat Fry Box Ribbon
Bag Ribbon
The following hardcoated bag ribbons are available as
accessories to hold french fry bags.
Five Pleat Fry Bag Ribbon (GRFHS-16 and -26)
Seven Pleat Fry Bag Ribbon (GRFHS-21)
Eight Pleat French Fry Bag Ribbon (all models)
Ten Pleat Fry Bag Ribbon (GRFHS-PTT21 and -PT26)
Seven Pleat Fry Bag Ribbon
Box/Bag Combo Ribbons
The following hardcoated box/bag combo ribbons are available
as accessories.
Six Pleat Fry Box/Bag Combo Ribbon (GRFHS-21)
a six pleat fry bag/box combo ribbon can be added to the fry bin
on either the right or left side. Each combo tray can hold up to
three fry boxes and three fry bags.
Nine Pleat Fry Box/Bag Combo Ribbon
(GRFHS-PTT21 and -PT26)
a nine pleated hardcoated fry bag/box combo ribbon can be
added to either the front or rear of the fry bin. Each combo tray
can hold up to four fry boxes and five fry bags.
Nine Pleat Combo Ribbon
Side-by-Side Bag
and Tong Holder
a side-by-side bag and tong
holder is available as an
accessory for GRFHS-21
models only. The bag and tong
holder hangs on the pan stop.
Piggy-Back Bag Holder
a piggy back bag holder is available
as an accessory for GRFHS-21 and
GRFHS-PTT21 models. a piggy-
back bag holder provides a second
bag holder.
Scoop Holder
a scoop holder is available as an
accessory for GRFHS-PT26 and
GRFHS-PTT21 models. The scoop
holder hangs on the pan stop.
Right- or Left-Hand Cutout for Fry Basket
an optional right- or left-hand cutout for easier access to a fry
station with a fryer basket is available for GRFHS-16,
GRFHS-21, and GRFHS-26 models.
GRFHS-PT26 w/ 6" (152 mm) Base
The GRFHS-PT26 is available with a 6" (152 mm) deep base
instead of the standard 4" (102 mm) base.
Dividers
additional dividers are available as accessories. Order using the
following Hatco P/N that corresponds to the appropriate model.
Model
GRFHS-16,
GRFHS-26,
GRFHS-PT16................................................. FHSDIV1
GRFHS-21...................................................... FHSDIV2
GRFHS-PT26 (standard),
GRFHS-PTT21............................................... FHSDIV3
GRFHS-22...................................................... FHSDIV4
GRFHS-PT26 (optional 6" [152 mm] Base).... FHSDIV5
10
English
Order Number
Form No. GRFHSm-0116