Call Duration; Mute; Paging; Activate A Handset (Power On) - Topcom Butler 2000 C Mode D'emploi

Butler 2000 C

5.5 Call Duration

During and after an external call, the call duration
is shown on the display.
• After picking up the
handset, the call duration
appears after 10 sec.
• When the call is finished, the call duration will be
visible for another 2 seconds. The time is
displayed in the following format: [mm : ss]
(minutes : seconds).

5.6 Mute

It is possible to deactivate the microphone during a
conversation. Now you can talk freely without
being heard by your correspondent.
• P ress and hold the Mute button for 1 second
during a conversation.
• "MUTED" is shown on
the display.
• When you want to continue the conversation,
p ress the Mute button a g a i n .

5.7 Paging

To find one or more lost handsets, press the Paging
button on the base unit.
• All subscribed handsets
will emit a signal and
"BASE->PAGING" is
shown on the display.
• When you have retrieved the handset, press the
Hookswitch button to turn off the signal. Paging
a handset is not possible when the unit is in
communication or is receiving a phone call.

5.8 Activate a handset (power on)

• The handset can be
activated/deactivated by
p ressing the Power button.
• When you activate a
handset, you will hear a warning signal. The
handset is looking for the base station.

5.9 Out of Range

• When the handset is out
of the working range of
the base unit or when
i t 's not subscribed to the
base unit, it will emit a warning tone.
• You have to move closer towards the base unit
or you have to subscribe the handset to the
base unit.

5.10 Empty Battery

• When the battery is
almost empty, you will
hear a warning tone.
• The battery symbol is shown on the display.
23:45
MUTED
BASE --> PAGING
SEARCHING FP
RANGE OUT
46 46 46 46 46 46 46 46 46
MULTI 1