Fault Diagnosis - Truvox International Multiwash II Manuel D'utilisation


Both the solution and recovery tanks should be emptied and
flushed out with clean water to ensure the seals and pumps are
free from any cleaning detergents.
MAINTENANCE
WARNING - Before undertaking maintenance
operations or adjustments switch off machine and
unplug from the electricity supply.
IMPORTANT – All other servicing and repairs should only be
performed by a Truvox engineer or Authorised Service Agent.
IMPORTANT – Should the machine fail to operate please refer to the
fault diagnosis section in the back of this instruction manual. If the
problem / remedy is not listed please contact Truvox Customer Service
Department for rapid attention.
The machine requires minimum maintenance apart from the following
checks by the operator prior to use:

Body of the machine - Clean with a damp cloth.

Power cord - Regularly inspect sheath, plug and cord anchorage for
damage or loose connection. Only replace the power cord with
the type specified in these instructions.

Brushes - For maximum life, wash the brushes regularly. Ensure
machine is in Transport mode when not in use. Store additional
brushes in a vertical position to avoid bending of bristles. Check
for permanent bending of bristles in a particular direction. This may
occur if the machine is operated for several days without removing
the brushes, which is not recommended. If this occurs, reverse the
brush so that the bent bristles are automatically straightened.

Wiper Blade - After years of use the wiper blade may wear. If this
occurs the water collection performance will decrease. It should
be replaced by an authorised service agent.

Solution tank filter (Standard) - The filter prevents clogging of the
drip holes in the tank. Periodically clean the filter to ensure
uniform discharge of liquid. In case of non-uniform discharge from
the drip holes, back flush the tank in running water. Clean the drip
holes.

Solution feed filter (Pump) - The filter prevents clogging of the
spray nozzle and should be periodically cleaned.

Nozzle maintenance (Pump) - If the spray of the nozzle becomes
blocked, slide the nozzle cover off and remove the nozzle. Wash
the nozzle in clean water, ensuring that the nozzle is clear before
refitting.
AFTER SALES SERVICE
Truvox machines are high quality machines that have been tested for
safety by authorised technicians. It is always apparent that after longer
working periods, electrical and mechanical components will show signs
RECOMMENDED SPARES & ACCESSORIES
Item MW240
Standard brush –
black (2 required)
Soft brush – grey
(2 required)
Side brush –
black (1 required)
Hard brush –
-
blue (2 required)
Escalator brush –
-
blue (2 required)
4 litre tank
-
Trolley
(for all models)

FAULT DIAGNOSIS

3
MW240/PUMP MW340
90-0127-0000
90-0133-0000
90-0134-0000
-
-
- 90-0307-0000
of wear and tear or ageing. To maintain operational safety and reliability
the following service interval has been defined: Every year or after 250
hours. Under extreme or specialised conditions and/or insufficient
maintenance, shorter maintenance intervals are necessary. Use only
original Truvox spare parts. Use of other spare parts will invalidate all
warranty and liability claims. Should you require after sales service please
contact the supplier from whom you purchased the machine, who will
arrange service. Repairs and servicing of Truvox products should only be
performed by trained staff. Improper repairs can cause considerable
danger to the user.
GUARANTEE
Your product is guaranteed for one year from the date of original
purchase, or hire purchase, against defects in materials or workmanship
during manufacture. Within the guarantee period we undertake at our
discretion, to repair or replace free of charge to the purchaser, any part
found to be defective, subject to the following conditions:
CONDITIONS
1. Claims made under the terms of the guarantee must be supported
by the original invoice/bill of sale issued at the time of sale, or the
machine Serial No.
2. For claims under this guarantee contact the supplier from whom
you purchased the product who will arrange the appropriate
action. Do not initially return the product as this could result in
transit damage.
3. Neither Truvox nor its distributor shall be liable for any incidental
or consequential loss.
4. This guarantee is governed by the laws of England.
5. This guarantee does not cover any of the following:





This guarantee does not affect your statutory rights, or your rights
against the supplier arising from their sales or purchase contract. Truvox
International Limited policy is one of continual product development and
we reserve the right to alter specifications without prior notice.
MW340/Pump
90-0130-0000
90-0131-0000
90-0132-0000
90-0089-0000
90-0090-0000
-
05-3395-0500
Periodic maintenance, and repair or replacement of parts due
to normal wear and tear.
Damage caused by accident, misuse or neglect, or the fitting
of other than genuine Truvox parts.
Defects in other than genuine Truvox parts, or repairs,
modifications or adjustments performed by other than a
Truvox service engineer or authorised service agent.
Costs and risks of transport relating directly or indirectly to
the guarantee of this product.
Consumable items such as, brushes, drive discs, filters and
vacuum skirts.
MW440/Pump
All natural stone floors, ceramic,
90-0387-0000 mosaic, wood, profiled rubber,
vinyl, PVC; smooth concrete
All natural stone floors, ceramic,
mosaic, wood, profiled rubber,
90-0388-0000
vinyl, PVC; short pile carpet,
marble granite
90-0385-0000 For up-to-the-edge cleaning
To suit individual floor conditions,
-
smooth concrete
90-0469-0000 For use on escalators
90-0103-0000
For easier transport
Usage
10-18