Technical Specifications - Truvox International Multiwash II Manuel D'utilisation

BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
INTRODUCTION
The following instructions contain important information about the
machine and safety advice for the operator. Equipment must be
operated, serviced and maintained
manufacturer's instructions. If in doubt contact the supplier of your
machine.
Read all instructions before using the
machine
PRODUCT INFORMATION
The Multiwash floor cleaning machines are designed for use on smooth,
even floors in indoor areas. They can be used on most floor surfaces
including short-pile carpet, wood, PVC, rubber and stone. This machine
is for indoor use only. The machine is intended for commercial use, for
example in hotels, schools, hospitals, factories, shops, offices, rental
businesses and other than normal housekeeping purposes.

TECHNICAL SPECIFICATIONS

Model
Product Code
Voltage AC (~)/ Frequency
Motor Power (+ pump)
Solution tank capacity
Productivity Rate
Brush width
Brush speed
Brush pressure
Sound pressure level
Dimensions (L x W x H)
Weight
Cable length
Warranty

Handle vibration does not exceed 2.5 m/s² when operating on a smooth hard surface.

Noise levels measured at a distance of 1 meter from machine and 1.6 metres above floor, when washing a hard floor. Measurements recorded using a
hand held meter.

Above dimensions are approx. Since the company's policy is to continuously improve the product, there could be changes without prior notice.
WASTE ELECTRICAL
(WEEE)
Do not dispose of this device with unsorted waste.
Improper disposal may be harmful to the environment
and human health. Please refer to your local waste
authority for information on return and collection
systems in your area.
1
in accordance with
Multiwash II
240
MW240
V/Hz 230/50
W 400
litres 1.2
m²/h 650
cm 24
rpm 650
g/cm² 250
dB(A) 68
37.8 x 34 x
cm
111.8
kg 20
m 12
1 year
& ELECTRONIC EQUIPMENT
IMPORTANT
EC Declaration of Conformity
Machine Type: Floor cleaning machine
Model: MW240..., MW240/PUMP..., MW340..., MW340/PUMP...,
the
MW440/PUMP...
This machine is in conformity with the following EU directives:

Machinery Directive

The EMC Directive
Applied harmonised standards:
EN60335-1, EN60335-2-72, EN55014-1, EN55014-2, EN61000-3-2,
EN61000-3-3, EN62233, EN61000-3-2, EN61000-3-3
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
Multiwash II Multiwash II
240 (Pump)
MW240/PUMP MW340
230/50 230/50
400 + 26
3
650
24
650
250
69
37.8 x 34 x 37.8 x 44 x
111.8
22
12
1 year 1 year
IMPORTANT SAFETY ADVICE
The safety information described in this manual provides basic
precautions and supplements standards in force in the country where
the machine is used.
This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury or
death.
WARNING – to reduce the risk of injury, electric
shock or fire.
1. This machine must only be used for the manufacturer's approved
application as described in this manual.
2. The machine must be unpacked and assembled in accordance with
these instructions before connecting to the electrical supply.
Operations Manager
Multiwash II
340 340 (Pump)
MW340/PUMP
230/50
600 600 + 26
1.7 4
930 930
34 34
650 650
250 250
69 69
37.8 x 44 x
111.8 111.8
23 25
12 12
1 year
2006/42/EC
2004/108/EC
Malcolm Eneas
Southampton,
27/06/2018
Multiwash II
440 (Pump)
MW440/PUMP
230/50
1000 + 26
4
1150
44
650
250
71
37.8 x 54 x
111.8
28
12
1 year
10-18