Fault Diagnosis - Truvox International Hydromist Lite HML Manuel D'utilisation

RECOMMENDED SPARES & ACCESSORIES
Wand
Hose assembly. Solution and vacuum hose.
Tool set. Upholstery tool and carpet tool
Hose bag for storage of hose and upholstery tool

FAULT DIAGNOSIS

The following simple checks may be performed by the operator. If the machine is still not working, please contact your local Service Agent:
Trouble
The spray pump and vacuum does
not work
Machine is not spraying solution
Machine is not spraying solution
evenly
Loss of vacuum suction
* If the fuse blows several times, the machine should be checked by an authorised Service Agent.
PLEASE REFER TO THE BACK OF THE MANUAL FOR PICTORIAL INSTRUCTIONS
4
Reason

Lack of voltage/electrical supply

Can you hear the
running?

Solution tank is empty

Solution feed filter is blocked

Spray nozzle is blocked

Solution feed filter is blocked

Recovery tank is full

Blocked hose or wand
HML
20-0155-0000
20-0153-0000
20-0156-0000
03-6029-0000
Remedy

Check fuse *, power cord, plug and socket outlet

pump If no, please contact your Service Agent.

If yes, see below.

Fill solution tank

Check the solution feed filter for blockages and signs of damage

Check the spray pipe and nozzle for blockages and signs of damage

Check the solution feed filter for blockages and signs of damage

Empty recovery tank

Check the wand and hose for blockages and signs of damage
04-19