Aesculap Nelson delux GN 640 Mode D'emploi page 48

Press the function key
The menu bar activation mode is displayed:
Press function key
mode is highlighted in black.
Confirm the setting by pressing function key
main menu.
- or -
To exit the menu without adopting the changes:
Press the function key
Note
If a monopolar output is allocated with an activation mode with auto-
COAG off that is not supported by the selected operational mode, the
system automatically selects the operational mode CONTACTCOAG.
If the activation mode foot pedal is selected, another menu bar is dis-
played:
Three settings can be chosen in this menu bar:
– activation of CUT and COAG
– activation of CUT only
– activation of COAG only
46
High frequency surgical device
.
repeatedly until the desired activation
and return to the
or wait for 30 seconds.
Option: Double foot pedal operates two different HF outputs
To control two different HF outputs with a double foot pedal: Press
function key at both outputs repeatedly until the required
function is displayed.
Confirm the setting by pressing function key
main menu.
- or -
To exit the menu without adopting the changes:
Press the function key
Display color for CUT: yellow
Display color for COAG: blue
Danger for patient and user from accidental acti-
vation of an output!
Exercise extreme caution when using a double
DANGER
foot pedal.
Listen for the acoustic signal for CUT or COAG.
Avoid contact between tissues and the deacti-
vated instrument.
Automatic disabling of the activation mode
If an activation mode that has already been selected (foot pedal or
autoCOAG) is allocated to an output, the device will react as follows:
• New allocation of an activation mode is transferred to the output
to be operated
• The icon of the activation mode on the card belonging to the orig-
inal allocation is marked with a red cross, meaning the activation
mode is disabled for the non-operational output.
(GN 640)
and return to the
or wait for 30 seconds.