Aesculap Nelson delux GN 640 Mode D'emploi page 46

Selecting operational mode CUT
Press the function key
The menu bar operational mode CUT is displayed:
Monopolar
Bipolar
Press the function key
is highlighted in black.
Confirm the setting by pressing the function key
the main menu.
- or -
To exit the menu without adopting the changes:
Press the function key
44
High frequency surgical device
.
repeatedly until the desired CUT mode
and return to
or wait for 30 seconds.
Selecting operational mode COAG
Press the function key
The menu bar operational mode COAG is displayed:
Monopolar
Press the function key
mode is highlighted in black.
Confirm the setting by pressing the function key
the main menu.
- or -
To exit the menu without adopting the changes:
Press the function key
Note
If an output is allocated with an operational mode that is not supported
by the selected activation mode autoCOAG off, the system automati-
cally selects a manual method of activation.
(GN 640)
.
repeatedly until the desired COAG
and return to
or wait for 30 seconds.