Getting Started P; Scope Of Delivery P; Installation Of Scale P; Switch On / Switch Off P - Soehnle Professional 9221 Mode D'emploi

2. GETTING STARTED
Scope of delivery
• Scale
• Platform
• Plug­in power supply unit
• USB cable
Installation of scale
1. Remove the foil and mount the platform.
2. Set up the scales at the point of application.
3. Align the scale horizontally using the ajusting
feet and spirit level.
4. Conntect the plug­in power supply unit.
During the charging cycle, an LED is lit on
the display unit.
5. The scale is ready for operation.
On / off key
Switch on / switch off
Switch on / off the scale over the on / off key (s.fig.).
Thereby do not load the scale.
Attention: Carefully place the item to be weighed
on the platform. Do not keep any loads permanently
on the platform. Avoid impacts and do not exceed
the specified maximum load. This could damage the
scale.
15