Overrun Settings; Warning And Alarms; Alarms - Nordcap 161 SOFT Mode D'emploi

Change the Overrun level:
Turn the upper part of the product input tube
Overrun
STOP
START
Alarm
The message flashes on the screen
until the problem is solved.
16 _EN _ES
5.Settings
6.Warnings and

alarms

RESET
In the case of a re-established alarm,
the message is static (not flashing).
(Amount of air in the Soft-Cream)
There are 4 Overrun levels.
- Overrun
(less air in the Soft-cream)
MIX
Alarm
5.2 Overrun Setting
+ Overrun
(more air in the Soft-cream)
6.1 Alarms
Display Screen
Shows alarm messages to indicate possible
machine damage.
The machine can be used for distribution if
there is a minor alarm; If it is a serious alarm,
the machine will not allow distribution.
READY!
T= +2º C
To reset the screen when the alarm has
been repaired, push the button
W -14