Installation; Place Of Installation - Nordcap 161 SOFT Mode D'emploi

All of the operations illustrated in this section are to be exclusively ca-
rried out by specialised technicians, those who have to organise the
different operative sequences and the use of suitable means to act at
all times within the rigorous application of current standards regarding
this matter
The following requirements must be met before installing the machine in the establishment:
That the network voltage coincides with
the one indicated on the identification
label.
Operating room temperature:
15 °C and 40 °C.
Must be installed in a place where it can be
monitored by qualified personnel.
Lateral separation distance is not necessary:
10 _EN _ES

3.Installation

3.1 Place of installation

Solid, flat and stable surface.
Easy access to the plug.
That the laws and current technical
standards are complied with when carr-
ying out the installation.