Güde GRK 250/300 Mode D'emploi page 10

GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions?
We will quickly help you and without needless bureaucracy at our home page www.guede.com in the Service part. Please
help us be able to help you. In order to be able to identify your appliance in case of claim, we need the serial No., Order No.
GB
and year of production. All this data can be found on the type label. Please enter the data below for future reference.
Serial No.:
Tel.: +49 (0) 79 04 / 700-360
Sighs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual
and/or on the unit:
Product Safety:
Product compliance with
respective EU standards
Bans:
General ban (in combination
with another pictograph)
Do not use the unit in rain
Precaution:
Warning/caution
Commands:
Read operating manual
before use
Wear goggles. Use ear
protectors
Environment Protection:
Wastes to be disposed of in
a professional manner not to
harm the environment
Illustrative pictures! Translation of original operating instructions.
Order No.:
Fax:
Do not reach in rotating parts
No pulling the cable
Use protection gloves
Cardboard packaging to be
collected for recycling.
+49 (0) 79 04 / 700-51999
Faulty and/or disposed of
electrical/electronic
appliances to be collected by
authorised salvage places
Packaging:
Protect from moisture
Fragile
Technical Data:
Engine power
Revolutions
Cutting width at 90°
Weight
Scope of Delivery (Fig. 1)
1. Hand grip and a switch
2. Carbon brush guard
3. Tripping lever
4. Scale with angle adjustment
5. Saw table
6. Mounting holes
7. Table extension equipment
8. End stop
9. Sawdust collecting bag
10. Circular saw blade mounting
11. Locking button
12. Circular saw blade guard
13. Locking lever for chamfer cutting
14. Locking lever for mitre cutting
15. Exhaust connection/dust bag connection
Year of production:
E-Mail: support@ts.guede.com
Keep Up
Connection
Ø circular saw blade
Cutting width at 45°