SOMFY DEXXO SMART io Manuel D'installation page 13

DEXXO SMART io
CONTENTS
1. Safety instructions
1.1. Caution - Important safety instructions
1.2. Introduction
1.3. Preliminary checks
1.4. Risk prevention
1.5. Electrical installation
1.6. Safety instructions relating to installation
1.7. Regulations
1.8. Assistance
2. Product description
2.1. Composition - Fig. 1
2.2. Description of the circuit board - Fig. 2
2.3. Field of application - Fig. 3
3. Installation
3.1. Installation height - Fig. 4
3.2. Installation steps - Fig. 5 to 15
4. Quick commissioning
4.1. Switching the installation on - Fig. 16
4.2. Memorising the Keygo io remote controls for operation in complete opening
- Fig. 17
4.3. Configuring the type of door - Fig. 18
4.4. Auto-programming the door travel
GENERAL INFORMATION
Safety instructions
Danger
Indicates a danger which may result in immediate death or serious injury.
Warning
Indicates a danger which may result in death or serious injury.
Precaution
Indicates a danger which may result in minor or moderate injury.
Attention
Indicates a danger which may result in damage to or destruction of the product.
1. SAFETY INSTRUCTIONS
DANGER
The motorisation must be installed and adjusted by a
professional motorisation and home automation installer,
in compliance with the regulations of the country in which
it is to be used.
Failure to follow these instructions may result in serious
injury, e.g. due to crushing by the door.
1.1. Caution - Important safety instructions
WARNING
For reasons of personal safety, it is important to follow
all the instructions, as incorrect installation can lead to
serious injury. Retain these instructions.
The installer must train all users to ensure the
motorisation is used in complete safety, in accordance
with the user manual.
©
Copyright 2018 SOMFY ACTIVITES SA. All rights reserved.
TRANSLATED VERSION OF THE GUIDE
2
2
2
3
3
4
4
4
4
5
5
5
5
5
6
6
6
6
6
6
7
5. Operating test
5.1. Complete opening operation - Fig. 20
5.2. Obstacle detection operation
5.3. Operation of the photoelectric cells
5.4. Operation of the gate contact
5.5. Specific operation
5.6. User training
6. Connecting additional devices
6.1. General wiring diagram - Fig. 21
6.2. Description of the various additional devices
7. Advanced parameter setting
7.1. Using the programming interface - Fig. 30
7.2. Meaning of different parameters
8. Programming the remote controls
8.1. Memorising the Keygo io remote controls
8.2. Memorising 3-button remote controls
9. Clearing the remote controls and all settings
9.1. Clearing memorised remote controls - Fig. 37
9.2. Clearing all settings - Fig. 38
10. Locking the programming buttons - Fig. 39
11. Diagnostic and repairs
11.1. Diagnostics
11.2. Safety device failure
12. Technical data
The user manual and installation manual must be given
to the end user. The installer must explain clearly to the
end user that installation, adjustment and maintenance
of the motorisation must be performed by a professional
motorisation and home automation installer.
1.2. Introduction
1.2.1. Important information
This product is a drive for vertically or horizontally opening
garage doors, for residential use as defined in standard EN
60335-2-95 and EN 60335-2-103, with which it complies.
The main purpose of these instructions is to satisfy the
requirements of the aforementioned standards and to ensure
the safety of equipment and persons.
WARNING
Any use of this product outside the scope of application
described in these instructions is prohibited (see "Field of
application" paragraph in the installation manual).
The use of any accessories or components not
recommended by Somfy is prohibited, as personal safety
cannot be guaranteed.
EN
7
7
7
7
7
7
7
7
7
8
8
8
8
9
9
9
10
10
10
10
10
10
11
11
1