1.2.2 Use as directed
The AKM2G series of synchronous servomotors is designed especially for drives for indus-
l
trial robots, machine tools, textile and packing machinery and similar with high require-
ments for dynamics.
The user is only permitted to operate the motors under the ambient conditions which are
l
defined in this documentation.
The AKM2G series of motors is exclusively intended to be driven by servo amplifiers
l
under speed and / or torque control.
The motors are installed as components in electrical apparatus or machines and can only
l
be commissioned and put into operation as integral components of such apparatus or
machines.
The thermal sensor which is integrated in the motor windings must be observed and eval-
l
uated.
The holding brakes are designed as standstill brakes and are not suited for repeated oper-
l
ational braking.
The conformity of the servo system to the standards mentioned in the CE Declaration of
l
Conformity (➜ # 251) is only guaranteed when the components (servo amplifier, motor,
cables etc.) that are used have been supplied by Kollmorgen.
1.2.3 Prohibited use
The use of the Standard Motors is prohibited
l
directly on mains supply networks,
l
in areas where there is a risk of explosions,
l
in contact with food and beverage,
l
in environments with caustic and/or electrically conducting acids, bases, oils, vapors,
l
dusts.
Commissioning the motor is prohibited if the machine in which it was installed
l
does not meet the requirements of the EC Machinery Directive,
l
does not comply with the EMC Directive,
l
does not comply with the Low Voltage Directive.
l
Built-in holding brakes without further equipment must not be used to ensure functional
l
safety.
AKM2G Instructions | 1 English
Kollmorgen | kdn.kollmorgen.com | August 2018
7