Kollmorgen AKM 2G Manuel D'installation page 212

AKM2G Instructions | 7 Technical Data
U Parameter
N
Inertia (incl. Resolver feedback) (3)
Optional Brake Inertia (additional)
Weight (8)
Static Friction (1)
Viscous Damping (1)
Thermal Time Constant
Thermal Resistance
Pole Pairs
Heatsink Size
1. Motor winding at temp. rise, δT = 100°C , at 40°C ambient
2. All data referenced to sinusoidal commutation
3. Add parking brake if applicable for total inertia
4. Motor with resolver feedback and standard heat sink
5. May be limited at some values of Vbus
6. Measured at 25°C
7. See de-rate chart for the de-rate of different motor options.
8. Brake motor adds 4.5 kg [10lbs]
9. Shaft seal increases Static Friction by 0.12 Nm [1.06 lb-in]
Brake options are listed in chapter "Technical Data Brakes" from ➜ #229.
212 Kollmorgen | kdn.kollmorgen.com | August 2018
Tolerance Symbol Units
Mechanical Data
kgcm 2
Jm
lb-in-s 2
kgcm 2
Jm
lb-in-s 2
W
Tf
Kdv Nm/krpm
lb-in/krpm
TCT mins.
Rthw-a
PP
AKM2G
64L 64M
16.9
1.49E-02
3.60
3.19E-03
kg 14.5
lb 32.0
Nm 0.0800
lb-in 0.708
0.0680
0.602
60
°C/W 0.359
5
18" x 18" x 1/2" Aluminum Plate
64N