Handling The Measuring Unit - SKF TKSA 11 Mode D'emploi

2.2 Handling the measuring unit

• Switch On the unit by pushing the
Power button at the top of the unit.
• Press the button for three seconds
to turn off.
• The Status LED will turn green when
the unit is switched on.
• The Connection LED will turn blue
when the unit is connected via
Bluetooth to the app.
Charge the measuring units when the app indicates low battery
• Plug the charger cable in the connector at the bottom of the unit, and the other end
to a standard USB charger (1A max) or a computer USB port.
• The red LED will indicate charging when the unit is off.
• The LED will go off when the battery is completely charged (about 4 hours for an
empty battery).
Note:
The unit will be charged at 90% in 2 hours with a 5W power adapter.
10 SKF TKSA 11