Mounting Directly On Couplings - SKF TKSA 11 Mode D'emploi

2.6 Mounting directly on couplings

For couplings with a large variation in the
shaft and the coupling diameter it might
not be possible to mount the system on the
shafts.
In this case mount the V-brackets directly
on the coupling. The system will not lose
accuracy even with a short distance between
the shaft brackets.
(Here you can see the chains hooked from
the outside).
Mounting Accessories:
V-Brackets with longer rods (120 mm
plus 80 mm) as well as extensions chains are
available as accessories.
Mounting tip:
Normally, the bar passes through the rods at
both V-brackets. When measuring uncoupled
machines, ensure that the bar ends before
the shaft bracket. This will make it possible to
turn one shaft at a time.
14 SKF TKSA 11