Star SP2000 Série Mode D'emploi page 23

6-2-3. Rewinder
When using the rewinder, follow steps 1 through 8 of section 6-2-2, and then
continue with the procedure described below.
9 Feed approximately 20 cm of roll paper from the paper exit by pressing the
[FEED] button.
FEED
0 Insert the end of the journal paper through the slit in the take-up spool as shown
below. Be sure that the right side of the paper is against the reel.
Fig. 6-18 Loading the paper
Spool
Fig. 6-19 Spool
– 20 –
Upper paper
Lower paper