Star SP2000 Série Mode D'emploi page 20

6-2-2. Loading the Paper
Fig. 6-12 Removing the cover
Roll paper
Fig. 6-13 Setting the paper
1 Lift the cover up approx. 3 cm. Hold
Cover
the cover tilted at this angle, then
pull it toward you to remove it.
2 Cut off the front edge of the roll
paper perpendicularly.
3 Confirm that the power of the printer
is turned on.
4 While observing the direction of the
roll, set the paper roll into the hol-
low as shown in Fig. 6-13.
– 17 –