Star SP2000 Série Mode D'emploi page 16

A
Fig. 6-3 Removing the ribbon cartridge
6-1-2. Loading the paper
Fig. 6-4 Removing the cover
Note: When removing the ribbon
B
1 Lift the cover up approx. 3cm. Hold
Cover
the cover tilted at this angle, then
pull it toward you to remove it.
2 Cut off the front edge of the roll
paper perpendicularly.
3 Confirm that the power of the printer
is turned on.
– 13 –
cartridge, raise the A section
and then remove it by hold-
ing the B section as shown in
Fig. 6-3.