Starting Up; Setting The Fan Operating Mode - Harvia SENTIO Just Sauna Fin Instructions D'installation Et Mode D'emploi

Installation instructions, only for experts

8. Starting up

The function selection switch in the
low-voltage connection area allows
a variety of product functions to be
activated. The figure at the right
shows the standard setting for the
function selection switch.
Note that the control unit needs to
be switched off for 10 seconds after
making changes so that the settings
are saved.

8.1. Setting the fan operating mode

The fan can either be dimmed or switched on and off. The dimmer switch function
is activated or deactivated using the function selection switch 1.
● The function selection switch 1 is set to the ON position as standard. This ac-
tivates the dimmer function.
● If you wish to deactivate the fan dimmer switch, place the function selection
switch 1 in the OFF position.
OFF
Fig. 6 Function selection switch –
Standard setting
p. 24/40