Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Attention - most important:
ELECTRONIC PROGRAMMER DISPLAY CLEANING
Strictly follow the information indicated in the chapter "CLEANING AND
MAINTENANCE".
"Touch-Control" keys
The "touch-control" keys shall be operated by the fingers (just by touching
the key). When using touch controls it is best to use the ball of your finger
rather than the tip.
Program and menu selection: after starting the procedure, the selection is
automatically deactivated after approx. 5 seconds from the last touch on
the display.
Setting the clock
When connecting for the first time, or after a power failure, the word "OFF"
flashes on the display and the "
the "+" or "―" key.

Important

The oven does not operate, in manual cooking, without first having set the
clock.
To change the time with the appliance already installed, touch the "
key for more than 2 seconds, then touch it again until the "
flashes. Then adjust the time, within 5 seconds, using the "+" or "―".
Important
It is not possible to adjust the clock if a cooking program is in progress.
Using the timer
You can use the timer at any time, even when the oven is not in use.
Attention - most important
This is only an alarm that DOES NOT switch off the oven or grill.
REMEMBER TO TURN OFF THE OVEN/GRILL MANUALLY.
" symbol is lit. Adjust the time touching
215
"
" symbol

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cfbi 601 ix

Table des Matières