BORETTI CFBI 601 AN Mode D'emploi page 228

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Removing and replacing the inner door glass pane for cleaning
If you wish to clean the inner glass of the door, make sure you follow the
precautions and instructions very carefully.
Replacing the glass pane and the door incorrectly may result in damage to
the oven and may void your warranty.
Important!
* Take care, the oven door is heavy.
If you have any doubts, do not attempt to remove the door.
* Make sure the oven and all its parts have cooled down. Do not
attempt to handle the parts of a hot oven.
* Take extreme care when handling the glass pane. Avoid the edges of
the glass bumping against any surface. This may result in the glass
shattering.
* Do not use harsh abrasive cleaners or sharp metal scrapers to clean
the oven door glass since they can scratch the surface, which may
result in shattering of the glass.
* If you notice any sign of damage on any of the glass panes (such as
chipping, or cracks), do not use the oven. Call your Authorised Service
Centre or Customer Care.
* Make sure you replace the glass pane correctly. Do not use the oven
without glass pane correctly in place.
* If the glass pane feels difficult to remove or replace, do not force it.
Call your Authorised Repairer or Customer Care for help.
Note: Service visits providing assistance with using or maintaining
the oven are not covered by your warranty.
Removing the inner pane of glass
The oven door is fitted with no. 2 panes:
* no. 1 outside;
* no. 1 inner.
To clean all panes on both sides it is necessary to remove the inner pane
as follows:
1. Lock the door open:
*
Fully open the oven door (fig. 6.17).
*
Fully open the lever "A" on the left and right hinges. (fig. 6.18).
*
Gently close the door until left and right hinge levers "A" are hooked to
part "B" of the door (figs. 6.18, 6.19).
228

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cfbi 601 ix

Table des Matières