BORETTI CFBI 601 AN Mode D'emploi page 223

Replacing the oven lamp
Warning
Ensure the appliance is switched off and disconnected from the
electrical power supply before replacing the lamp to avoid the
possibility of electric shock.
* Let the oven cavity and the
heating elements to cool down.
* Switch off the electrical
supply.
* Remove the protective cover
"A" (fig. 6.4).
* Replace the halogen lamp
"C" with a new one suitable
for high temperatures
(300°C) having the following
specifications: 220-240 V,
50/60Hz and same power
(check watt power as stamped
in the lamp itself) of the
replaced lamp.
Important Warning
Never replace the bulb with bare hands; contamination from your
fingers can cause premature failure. Always use a clean cloth or gloves.
* Refit the protective cover.
Note
Oven lamp replacement is not covered by your guarantee.
WRONG
CORRECT
C A
223
Fig. 6.4