• Avoid contacting solid obstacles
(stones, walls, fences, etc.) since
this would make the string wear
out too quickly. Use the edge of the
protective cover to keep the appli-
ance away from such obstacles.
Cutting grass
Cut the grass by swaying the trimmer side-
ways to the right and left. Cut slowly, tipping
the appliance slightly fowards .
•
Long grass should be cut at layers from
top to bottom.
To make
your work
easier,
you can
use the
chassis
to work
along
lanes si-
milar to a lawn mower. The chassis
is intended for larger lawns to avo-
id having to carry the appliance the
whole time.
Vertical cutting / edge
trimming
•
Be particularly careful and attentive
when holding the cutter head verti-
cally. To avoid injuries, keep enough
distance to the cutting thread.
•
To prevent the thread from wearing
out quickly, avoid contacting solid sur-
faces.
•
To trim lawn edges, slowly move the
appliance along the lawn edges.
•
Vertical trimming is best done by mo-
ving the appliance on its castor roll.
•
You can also tip the chassis to the left
or right and use it as a guide for edge
trimming.
G
Setup for vertical trimming
without chassis:
• Handle rod: 180° (see
• Cutting angle: position 1
F
(see
• Spacer bow in parking position
• No chassis
H
Setup for edge trimming with
chassis:
• Handle rod: 90° (see
• Chassis tipped to one side
• Cutting angle: position 4
F
(see
• Spacing bow in parking position
Cleaning and
maintenance
Always disconnect the plug from
the mains socket before working
on the trimmer.
Any work that is not described
in these Instructions must be
carried out by a servicing agen-
cy authorized by us. Only use
original parts and be very care-
ful with the line cutter during in-
stallation work. Danger of injury!
Cleaning
Do not jet water onto the trimmer
and do not clean it under flowing
water. This would result in the
danger of an electric shock and
the trimmer could be damaged.
Always keep the trimmer clean. Do no
use cleaning agents and solvents.
F
)
F
)
GB
)
)
87