Trouble Shooting - Grizzly ERT 530 R Notice D'utilisation Originale

GB
Weight .............................................2,5 kg
Dual line............... 2 x 5 m, fully automatic
Cutting circle dual line ....................300 mm
Line thickness dual line ................ 1,4 mm
Protection Class ....................................
Sound power level (L
guaranteed..................................96,0 dB (A)
measured ...........94,0 dB (A); K
Sound pressure level
(L ) ..................74,0 dB (A); K
pA
Vibration (a )
n
upper handle ............3,7 m/s

Trouble shooting

Problem
Trimmer vibrates
Trimmer does not start
Poor cutting perform-
ance
90
)
WA
=1,93 dB
wA
=1,93 dB
pA
; K =1,5 m/s
2
n
Possible cause
Spool is dirty
Spool is defective
No mains power
ON / OFF switch defec-
tive
Worn carbon brushes
Motor defective
Line spool does not have
sufficient line
Line has not been con-
ducted out of the spool or
only on one side
additional handle .......1,6 m/s
Noise and vibration ratings have been
determined pursuant to the standards and
II regulations specified in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
2
instruction manual can therefore not be
considered as valid.
Remedy
Clean spool (see "Cleaning and
maintenance")
Exchange spool (see Cleaning
and maintenance „Exchanging
the line spool")
Check cable, line, plug; repair by
qualified electrician
Repair by After-Sales Service
Lengthen cutting line
(see "Operation")
or exchange spool (see Clea-
ning and maintenance „Exchan-
ging the line spool")
Remove spool and lace line
through opening outwards and
return spool.
; K =1,5 m/s
2 2
n