Grizzly ERT 530 R Notice D'utilisation Originale page 82

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
GB
perfectly safe condition, especially the
power cable, the switch and the protec-
tive cover.
Never disconnect or remove any pro-
tective devices!
Use:
Always maintain a secure footing while
working. Be especially careful when
working on a sloping terrain.
Do not operate the equipment if you are
tired or lack concentration and after hav-
ing drunk alcohol or taken medication.
Always take a work break in due time.
Do not use the equipment while it is
raining, in poor weather conditions and
when the surrounding area is wet. Only
work when the light conditions are good.
Always keep the cutting line well away
from the body, particularly the hands
and feet, when you switch on the mo-
tor and while the motor is running.
Never start the equipment when it is
turned over or not in the correct work-
ing position.
Switch off the motor and disconnect
the plug from the mains socket:
- Whenever you are not using the
equipment
- If the equipment is left unattended
- When the equipment is being
cleaned, maintained or is to be in-
spected
- When relocating the equipment
- If the power or extension cable is
damaged
- When you remove or exchange the
cutting device or manually adjust the
length of the cutting line
Check when starting up and working
with the cutting head that it does not
come into contact with stones, rubble,
wire or other foreign bodies.
Take care not to provoke injuries on
82
each device used for cutting the string
lengths. After pulling out a new string,
always hold the machine in its normal
working position before switching it on.
Always be very careful about the line
cutter as it can cause very serious cuts
Never try to stop the cutting device
(cutting line) with your hands. Always
wait until it has stopped rotating.
Only use an original cutting line. The
use of a metal wire instead of the nylon
line is impermissible.
Do not use the equipment to cut grass
that is not growing on the ground, e.g.
grass on walls, rocks, etc.
Do not traverse gravel paths while the
equipment is operating.
Do not operate the equipment in the
vicinity of inflammable liquids or gases
as this could give rise to the danger of
a fire or explosion.
Store the equipment in a dry place that
is not accessible to children.
CAUTION! The following states how
damage to the equipment and possi-
ble injury to people can be avoided:
Taking care of the equipment:
Ensure that the ventilation openings are
not clogged.
Only use spare parts and accessories
that have been supplied or recommend-
ed by the manufacturer.
Never try to repair the equipment your-
self. All work that has not been listed in
these Instructions must only be carried
out by an authorised servicing agency.
Treat the equipment with the greatest
care. Always keep the equipment clean
for better and safer work. Follow the
maintenance instructions.
Never overload the equipment. Always
work within the stated capacity range.

Publicité

Table des Matières
loading

Table des Matières