Initial Configuration - Palazzetti ECOFIRE ADAGIO Notice D'installation

6.3 INITIAL CONFIGURATION

Before proceeding, power up the stove using the safety switch on the rear.
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Use the
d) Press and enter the value "54" using the
e) Press
f)
g)
h) Press
seconds. Ignore this and switch the stove off using the safety switch on the rear, wait a few seconds and
TWO DIFFERENT CONFIGURATIONS ARE AVAILABLE:
CONFIGURATION 1 (default)
The stove will module its power according to the room temperature read by the probe on the stove.
temperature.
CONFIGURATION 2
cod. 00 477 2290 - 04/2015 - Palazzetti - PN - Italy
INSTALLATION
to go to the setup menu
buttons to scroll to and select submenu
and then press ;
[30] --0
; "
buttons;
buttons;
41