Preliminary Operations; Loading The Pellets; Power Supply; Initial Settings - Palazzetti ECOFIRE ADAGIO Notice D'installation

8 PRELIMINARY
OPERATIONS

8.1 LOADING THE PELLETS

The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets. A safety switch (just for
the models that are equipped with it) makes sure
that the pellet tank lid has been closed properly (IS
in
pellet tank lid stays open for more than one minute
while the stove is still working.
At this point, to take advantage of the 'Autonomy'
function, use the arrow buttons
the combustible icon
. Select "Full" by pressing
button
In order to disable this function, select "Off" instead
of "Full".

8.2 POWER SUPPLY

Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
"I" (Fig. 8.2). If the connections are correct the
stove will emit a series of intermittent beeps, the
display will come on.
plugging the stove into the power supply.
If not using the appliance for an extended period,
the switch at the rear of the stove should be moved
to position (O).

8.3 INITIAL SETTINGS

The language, current date and time need to be
set before using the stove.

8.3.1 Time and Date setting

To set the date:
a) Use the
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d)
e)
f)
g)
h)
i)
j) Press
46
USE AND MAINTENANCE
to move to
and press the
buttons to go to the setup menu
IS
and press ;
[3]
and press
buttons and press
buttons and press
buttons and press
buttons and press
buttons and press
cod. 00 477 2290 - 04/2015 - Palazzetti - PN - Italy
;
;
;
;
;
buttons;