Preliminary Operations; Loading The Pellets; Power Supply; Initial Settings - Palazzetti ECOFIRE IDRO Manuel D'utilisation Et D'entretien

2 PRELIMINARY
OPERATIONS

2.1 LOADING THE PELLETS

The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
Make sure the hopper lid is well closed again after
having loaded the pellets. A safety switch (just for
that the pellet tank lid has been closed properly (IS
pellet tank lid stays open for more than one minute
while the stove is still working.

2.2 POWER SUPPLY

Plug the stove into the mains power supply, move
the power switch at the rear of the stove to position
"I" (Fig. 2.2). If the connections are correct the stove
will emit a series of intermittent beeps, the display
will come on.
the switch at the rear of the stove should be moved
to position (O).

2.3 INITIAL SETTINGS

Current date and time need to be set before using
the stove.
2.3.1
To set the date:
a) Use the
b) Use the button to select the password "7" and then press
c) Use the button to scroll to and select submenu
d)
e)
f)
g)
h)
i)
j) Press
buttons to go to the setup menu
IS
and press ;
[3]
and press
buttons and press
buttons and press
buttons and press ;
buttons and press
buttons and press
Fig. 2.1
Fig. 2.2
;
;
;
;
buttons;
19