Preliminary Operations; Loading The Pellets; Power Supply; Initial Settings - Palazzetti ECOFIRE Serie Mode D'emploi

8 PRELIMINARY
OPERATIONS

8.1 LOADING THE PELLETS

The rst operation to be performed before starting
the appliance is to ll the hopper with fuel (pellets).
The pellets are loaded into in the hopper using a
scoop.
Do not empty the sack directly into the hopper so
as to avoid loading sawdust or other foreign bodies
that may affect proper stove operation and avoid
spilling pellets outside of the hopper.
The pellets are loaded via a hatch to be tted to the
hood of the enclosure and connected to the stove
with the optional accessory equipment. Make sure
to follow the installation instructions included with
the kit.
Do not use the stove removal system to load the
pellet tank.
The pellet loading pipe must be used solely as a
chute for loading the tank and not as an extension to
the tank itself; do not ll the tank beyond its normal
capacity (without the pipe).

8.2 POWER SUPPLY

Plug in the stove and make sure the rebox door
is closed.
If provided, move the switch at the rear of the stove
to position (I).
If the connections are correct the stove will emit a
series of intermittent beeps, the display will come
on. After 2 seconds the display will show "OFF" and
the second row will show the operating parameters:
POWER, AIR FAN, SET ROOM T..
If not using the appliance for an extended period, the
switch at the rear of the stove, if provided, should
be moved to position (O).
00 477 3370 - 09/2014 - PN - Italy
USE AND MAINTENANCE

8.3 INITIAL SETTINGS

8.3.1 language setting
8.3.2 Time setting
8.3.3 Date setting
The language, current date and time need to be set
before using the stove.
Go to the "STOVE SETTINGS MENU" following the
"Procedure for accessing the menus" described in
paragraph 7.3 and press OK.
1) Scroll the submenus using the
2) Use the button to select the "LANGUAGE"
menu
3) Select the desired language using the
button
4) Con rm the selection by pressing
5) Press ("x") to exit the submenu (press the
OFF
same button again if necessary to go back
another menu level).
Go to the "STOVE SETTINGS MENU" following the
"Procedure for accessing the menus" described in
paragraph 7.3 and press OK.
4) Scroll the submenus using the
5) Use the button to select the "TIME" menu
6) Select the current day using the
button and con rm by pressing
7) Select the current hours using the
button and con rm by pressing
8) Select the minutes hours using the
button and con rm by pressing
9) Press ("x") to exit the submenu (press the
OFF
same button again if necessary to go back
another menu level).
Go to the "STOVE SETTINGS MENU" following the
"Procedure for accessing the menus" described in
paragraph 7.3 and press OK.
4) Scroll the submenus using the
5) Use the button to select the "DATE" menu
6) Select the current day, month and year desired
using the or button and con rm each
selection by pressing
7) Press ("x") to exit the submenu (press the
OFF
same button again if necessary to go back
another menu level).
or button
or
("ok")
or button
or
("ok")
or
("ok")
or
("ok")
or button
("ok")
53