NOMICS BRIZZY NS21 Manuel D'utilisation page 30

Eng
Installation of the oximetry sensor
Installation of the sensor is illustrated below and in the documents accompanying the sensor. It
is recommended to run the sensor cable along the arm under the pajama top to allow it to meet
the oximetry module on the chest of the patient. Make sure the finger on which the oximetry
sensor is placed is free of colored nail polish.
The 8000J and 8000SM SpO2 sensors from Nonin are reusable. Consult their instructions for
use.
Installation of the ECG module
Installation of the three ECG electrodes is illustrated below. It is recommended to run the cables
under the pajamas to meet the ECG module on the patient's chest.
OXIMETRY OPTION ECG OPTION
USB JAWAC
USB JAWAC
Installation of Brizzy NS21 Installation of Brizzy NS21
Oximetry Option ECG Option
Eng-28 MU_BRIZZY_REV5 / 03-2017 © Nomics s.a. All rights reserved