Recharging The Battery; Setting Time Of The Recorder - NOMICS BRIZZY NS21 Manuel D'utilisation

Eng
Frame 'Report'
The Brizzy report provides severity indicators. The position of these indicators with respect to
their thresholds can characterize the pathology. Documentation showing the different possible
cases and typical positions of severity indicators in such cases is provided with the device and/
or available on the manufacturer's website.
The results of the automatic analysis of the data form a proposal for the
assessment of sleep disordered breathing. However, the automatic analysis
cannot substitute a doctor's judgment and hence it is the operator's responsi-
bility to evaluate the results and to seek advice from a specialist if necessary.

RECHARGING THE BATTERY

The device contains an internal rechargeable lithium polymer battery. The same USB cable
used for importing data from the device serves to charge the battery. The charging begins
automatically when the device is connected to the PC, or to a USB charger
In order to ensure optimal safety, please observe the rules provided in section "Warnings and
Safety Notice".
It is recommended to recharge the battery completely between each recording.
When charging, the yellow indicator light on the front face of the selected device starts to flash
and continues flashing until its battery is fully recharged. A full charge takes between 2 and 3
hours. When fully charged, the yellow light stays ON permanently until the USB cable is discon-
nected. To recharge the battery after a download, keep the Brizzy connected to the computer,
or connect the Brizzy to a USB charger.

SETTING TIME OF THE RECORDER

The time of BRIZZY is set automatically to that of the computer as soon as CERES recognizes
BRIZZY (serial number is displayed).
Eng-20 MU_BRIZZY_REV5 / 03-2017 © Nomics s.a. All rights reserved