Operating The Software; System Requirements; Installing The Software - NOMICS BRIZZY NS21 Manuel D'utilisation

OPERATING THE SOFTWARE

Some operations execute through the special Nomics-designed USB cable
to connect the recorder to a PC. For safety reasons, it is strictly forbidden to
connect the device to a computer while the patient wears the device. The
patient must be kept at more than 1.50m (5ft) from the device while the device
is connected to the PC. Do not hand over the USB cable to the patient with the
device.

SYSTEM REQUIREMENTS

Minimal configuration requirements:
√ Windows® XP SP3, or later
√ An active connection to internet
√ Graphical resolution min 1024 x 768
√ 1 USB port

INSTALLING THE SOFTWARE

√ Make sure that the computer meets the minimal configuration requirements given above.
√ Start the computer. Close all running applications before you install the CERES software.
√ Double-click on the 'CERES' file provided or download it from the company's website.
√ The installation utility informs you of the progress of the operation. Depending on the configu-
ration of the computer the installation may take several minutes.
√ When you connect a BRIZZY recorder to a computer for the first time, a window 'Found New
Hardware' may appear. Always authorize the installation of the peripheral drive; it will install
automatically.
√ After installation has completed, restart the computer.
√ The software is ready for use.
Additional information is also available on the website http://www.brizzy.eu
© Nomics s.a. All rights reserved MU_BRIZZY_REV5 / 03-2017 Eng-17
Eng