Making A Recording - NOMICS BRIZZY NS21 Manuel D'utilisation

Eng

MAKING A RECORDING

To start a recording, simply connect the mandibular movement sensor (Jawac) to the device.
The illumination of the indicator light indicates the correct device startup. Recording starts as
soon as the indicator light flashes. Depending on the version of the device, the flashing starts
immediately or after about 2 minutes, and is maintained for the duration of the recording.
To stop a recording, simply disconnect the mandibular movement sensor from the device. The
indicator light will stop flashing and the device will return to sleep mode. Data can then be
uploaded to a computer via the special USB cable.
Remarks:
• The recording stops by itself when the battery charge becomes insufficient to ensure proper
operation of the device. Always make sure that the battery is sufficiently charged when you
start a recording.
• The memory can contain several recordings.
The device stores the data in internal memory and keeps it in memory as long as the device
has not been connected to a computer. Once the device is connected to a computer, the memo-
ry becomes erasable, i.e., the entire memory will be erased at the start of the next recording in
order to free up memory space for the new data to be recorded.
To avoid any risk of data loss, it is recommended to always download the
recording as soon as it has been made.
Eng-14 MU_BRIZZY_REV5 / 03-2017 © Nomics s.a. All rights reserved