Troubleshooting; Technical Data - Cleanmaxx 00142 Mode D'emploi

EN

Troubleshooting

If the device stops working properly, fi rst check whether you are able to correct the prob-
lem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does
not start.
Low suction force.
Dust escapes from
the device during
cleaning.
The battery is not
charging up. The
battery control
lamps (9) are off.
Unusual odour

Technical Data

Article number:
Device
Model number:
Voltage supply:
Motor power:
Battery charge time:
Battery operating time:
Capacity of dust container: approx. 500 ml
Mains adapter
Model number:
Voltage supply:
Output:
Protection class:
00142_de-en-fr-nl_A5_V1.indb 24 00142_de-en-fr-nl_A5_V1.indb 24
24
Possible cause / solution
• Is the battery fl at? Charge up the battery.
• Is the battery too weak? Charge up the battery.
• Is the dust container (12) full? Empty the dust container.
• Is the fi lter heavily clogged up? Clean the fi lter.
• Is the suction opening/nozzle blocked? Switch off the device
and remove the blockage.
• It is also possible that some items will be too big / heavy to be
picked up by the device.
• Check whether the dust container (12) and fi lter have been
inserted correctly and adjust the fi t if necessary.
• Is the HEPA fi lter worn or damaged? Order a new HEPA fi lter
via www.service-shopping.de and replace it.
• Is the device seated correctly in the charging station (23)?
• Is the mains adapter (21) connected correctly to the plug
socket and the charging station (23)?
• Is the plug socket defective? Try another plug socket.
• Check the fuse of the mains connection.
• A new odour is normal when the device is used for the fi rst
time; it disappears after a while.
00142
EV-660-S148
14.8 V DC, 2200 mAh (4x Li-ion battery ICR18650)
80 W
approx. 12 – 14 hours (when fi rst charged)
approx. 20 minutes (with fully charged battery)
YH-1800500
100 – 240 V ~ 50 /60 Hz
18 V DC, 500 mA
II
19.09.2016 12:38:13 19.09.2016 12:38:13