Safety; Storage And Transport - ProMinent DULCOMETER pH/mV/Pt 1000 Mode D'emploi

2
Correct use The portable meter and simulator is a microprocessor controlled device for
measuring pH value, redox potential and temperature, as well as the simulation
of pH value and redox potential.
The device is intended exclusively for:
• Measurement of pH, redox and temperature
• Simulation of pH and redox
• All other applications and/or modifications are prohibited
The device must be protected from water, chemicals and extreme ambient
conditions. In particular, the equipment should not be left in cars. Radiation
from the sun in summer and frost in winter may destroy probes and buffer
solutions.
3
Ambient conditions for storage and transport
Temperature:
Air humidity:
®
ProMinent

Safety

IMPORTANT
• The appliance is delivered without batteries fitted. The
batteries are included separated. Only batteries which do
not leak (2 x 1.5 V alkaline batteries, size "AA", Mignon,
IEC-LR6) may be inserted.
• 1.2 V accumulators must NOT be used.
The instructions for use of the probes must be observed.
Storage/Transport
IMPORTANT
• Transport and store the device in its original packaging
• Protect the device from damp and the effects of chemicals
even when packed.
-20 °C to +60 °C
< 95 % relative humidity, non-condensing
Safety / Storage/Transport
27