Operating Conditions; Type Label (Example) - Burkert 6014 Manuel D'utilisation

7. Technical daTa
7.1. conformity
In accordance with the EC Declaration of conformity, the
solenoid valve Type 6014 is compliant with the EC Directives.
7.2. standards
Conformity with the EC Directives is verified by the fol-
lowing standards.
EN 60079-0, EN 60079-7, EN 60079-18, EN 61241-0,
EN 61241-1, EN 13463-1

7.3. Operating conditions

Warning!
Heat sources and temperature fluctuations may
cause malfunctions or leaks.
• If the device is used outdoors, do not expose it unpro-
tected to the weather conditions.
• Avoid heat sources which may cause the allowable
temperature range to be exceeded.
Ambient temperature: -10 – +55 °C
Medium temperature:
FKM -10 – +100 °C (PA coil)
-10 – +120 °C (Epoxid coil)
english
12
7.5. fluidic data
Circuit functions
2(A)
C
3/2-way valve, direct-acting,
(NC)
normal output A unloaded
1(P) 3(R)
2(B)
D
3/2-way valve, direct-acting,
(NO)
normal output B pressurized
1(P) 3(R)
2(A)
3/2-way valve, direct-acting,
T
Universal valve
1(P) 3(R)
Tab. 1: Circuit functions
Pressure range see type label
Line connectors Type 6014:
Type 6014P: G1/8, G1/4
Hollow screw G1/8, G1/4
Note the information specified on the type label for
voltage, type of current, and pressure.
english
14
G1/8, G1/4, Flange
Media: neutral gaseous and liquid media
(e.g. compressed air, town gas, natural
gas, water, hydraulic fluid, petrol, tech-
nical Vacuum), which do not attack
body and sealing materials (see table of
resistance)
Viscosity: max. 21 mm²/s
Protection class: IP65 in accordance with EN 60529 with
cable plug
7.4. mechanical data
Dimensions See data sheet
Body material Type 6014:
Type 6014P: Brass, Polyamide (PA)
Hollow screw Type 6014P: Brass, nickel-plated
Base plate Type 6014P: Aluminium, anodized
Sealing material Type 6014:
Type 6014P: FKM

7.6. Type label (example)

Body material
Sealing material
Orifice
Circuit function
Type
6014 C 1,5 FKM MS
G1/8 PN 0 - 16 bar
24V
00450000
Ident. no.
Voltage / frequency output
Nominal connection / pressure
Type 6014
Brass,
Stainless steel 1.4305
Polyamide (PA, Flange)
Aluminium, anodized
IXEF
FKM
EPDM on request
english
13 13
50Hz 8W
CE
WXXXX
english
15 15