Power Supply - Connector Pinout - Siemens SIMATIC VS710 Notice D'utilisation

SIMATIC VS710
2.4

Power Supply - Connector Pinout

4-pin round connector pinout
Figure 7 Power Supply - Connector Pinout
Note
The pin numbers are as seen on the rear casing with the unit in an upright
position.
Warning
!
V = 24 VDC / 500 mA
N
(Voltage range: 20.4 to 28.8 volts)
The power supply connector has the following pinout:
Pin
1
2
3
4
Maximum current per pin = 1 A.
The connector acts as a means of isolation from the 24-volt power supply.
10
Quick Reference Guide
!
PS
Signal
24 volts
24 volts
Ground
Ground
SIMATIC VS710
C79000-K8576-C167-01