Vga Connector Pinout - Siemens SIMATIC VS710 Notice D'utilisation

SIMATIC VS710
2.7

VGA Connector Pinout

You can connect a monitor to your VS710 using the VGA socket
connector. The VGA socket connector has the following pinout:
15-pin subminiature D connector
11 12 13 14 15
6 10
1 2 3 4 5
VGA Socket Connector
Figure 14
Pin
1 Red
2 Green
3 Blue
4 Not assigned
5 Digital ground
6 Digital ground
7 Digital ground
8 Digital ground
9 Not assigned
10 Digital ground
11 Not assigned
12 Not assigned
13 Horizontal sync
14 Vertical sync
15 Not assigned
Shield On connector casing
Note
Connect your VGA monitor with the standard VGA cable.
The distance between monitor and VS710 should not exceed 2.5 m.
16
Quick Reference Guide
Signal
SIMATIC VS710
C79000-K8576-C167-01