Mounting Bracket; Lens Socket - Siemens SIMATIC VS710 Notice D'utilisation

SIMATIC VS710 Quick Reference Guide

Mounting Bracket

The mounting bracket snaps into place on top of the back panel and is
screwed tight on the front panel, leaving the other three sides of the casing
free for other mounting alternatives.
Mounting bracket
M 4 screws
M 2.5 set screw with hex socket
Figure 5 VS710 with Mounting Bracket Attached

Lens Socket

The lens socket fits all commercial C-mount standard lenses.
The lens position can be adjusted using the set screw on the lens socket.
This makes it possible to adjust the focus of fixed-focus miniature lenses
(see figure above).
SIMATIC VS710
8
C79000-K8576-C167-01