Install/Replace Microsd Card - Sygonix 2267527 Notice D'emploi

b) Install/replace microSD card
Important
• The microSD card should be formatted using FAT32
or exFAT file systems. Refer to your computer soft-
ware instructions for information about how to do this.
• If needed, use a tool such as a flathead screwdriver to
gently pry the cover open. Do not use excessive force
and be careful not to damage the housing.
1. Insert the microSD card into slot, it will "click" into place.
2. Remove using the tip of your finger to press down until it
"clicks", then release to eject.
Pair the device with the app before replacing the
compartment cover.
3. Replace the cover.
44