Operation; Power On; If Not Paired With App; If Already Paired With App - Sygonix 2267527 Notice D'emploi

13. Operation

a) Power on
• The camera will turn on when connected to the power supply.
• It will take a few moments for the camera to load up.
• A voice prompt will indicate the camera has fully started up.
b) If not paired with app
• You will hear beeps at regular intervals.
• The beeps will continue until the camera has been paired.
• If needed, see section "d) Reset the camera" to enter pairing
mode.
c) If already paired with app
• If the camera is already paired with the app there will be no
beeping.
• The camera will function as usual after starting up.
45