Vision Fitness TF40 Manuel Du Propriétaire page 19

TF40 ASSEMBLY STEP 4
HARDWARE FOR STEP 4 :
ARC
SPRING
WASHER (E)
WASHER (B)
8.4 mm
8.2 mm
Qty: 6
Qty: 6
TF40 ONLY
CONSOLE BASE
CONSOLE CABLES
CONSOLE MAST
SCREWS (N)
BASE FRAME COVER
BASE FRAME
NOTE: This step is for TF40 models only.
A
SCREW (N)
BOLT (A)
20 mm 12 mm
B
Qty: 4
Qty: 6
BOLTS (A)
SPRING WASHERS (B)
ARC WASHERS (D)
C
D
E
Open HARDWARE FOR STEP 4.
Gently place CONSOLE BASE on top of
CONSOLE MASTS.
NOTE: Be careful not to pinch the console
cables while attaching the console base.
Connect the CONSOLE CABLES and tuck
them inside the CONSOLE MASTS and slide
CONSOLE BASE into CONSOLE MASTS.
Connect the CONSOLE BASE to CONSOLE
MASTS using 6 ARC WASHERS (E), 6
SPRING WASHERS (B) and 6 BOLTS (A).
NOTE: Tighten all bolts from STEPS 1–3.
Attach the BASE FRAME COVERS to the
BASE FRAME using 4 SCREWS (N).
TF40
ONLY
19