Vision Fitness TF40 Manuel Du Propriétaire page 18

T40 ASSEMBLY STEP 4
T40
ARC
WASHER (E)
ONLY
8.4 mm
Qty: 6
T40 ONLY
CONSOLE
MAST
MAST
COVERS
SCREWS (G)
BASE FRAME
18
HARDWARE FOR STEP 4 :
SPRING
BOLT (A)
WASHER (B)
20 mm
8.2 mm
Qty: 6
Qty: 6
CONSOLE BASE
CONSOLE CABLES
BOLTS (A)
SPRING WASHERS (B)
ARC WASHERS (D)
NOTE: This step is for T40 models only.
Open HARDWARE FOR STEP 4.
A
SCREW (G)
12 mm
Gently place CONSOLE BASE on top of
B
Qty: 6
CONSOLE MASTS.
NOTE: Be careful not to pinch the console
cables while attaching the console base.
Connect the CONSOLE CABLES and tuck
C
them inside the CONSOLE MASTS and slide
CONSOLE BASE into CONSOLE MASTS.
Connect the CONSOLE BASE to CONSOLE
D
MASTS using 6 ARC WASHERS (E), 6
SPRING WASHERS (B) and 6 BOLTS (A).
NOTE: Tighten all bolts from STEPS 1–3.
Attach MAST COVERS to BASE FRAME
E
using 3 SCREWS (G).
Repeat on other side.
F