Vision Fitness TF40 Manuel Du Propriétaire page 16

TF40 ASSEMBLY STEP 3
BOLT (L)
TF40
20 mm
ONLY
Qty: 4
TF40 ONLY
HANDLEBAR
ARC WASHERS (E)
SPRING WASHERS (B)
BOLT (A)
SUPPORT BAR
BASE FRAME
SPRING WASHERS (J)
BOLTS (L)
FLAT WASHERS (H)
16
TF40 HARDWARE FOR STEP 3 :
SPRING
FLAT
WASHER (J) WASHER (H)
6 mm 6 mm
Qty: 4 Qty: 4
SPRING
BOLT (A)
WASHER (B)
20 mm
8.2 mm
Qty: 2
Qty: 2
NOTE: This step is for TF40 models only.
Open HARDWARE FOR STEP 3.
A
Attach the bottom of the SUPPORT BAR to the
B
BASE FRAME using 2 FLAT WASHERS (H), 2
SPRING WASHERS (J) and 2 BOLTS (L).
NOTE: Do not tighten bolts until step 4 is complete.
Attach the top of the SUPPORT BAR to the
C
HANDLEBAR using 1 ARC WASHER (E), 1
SPRING WASHER (B) and 1 BOLT (A).
Repeat on other side.
D
ARC
WASHER (E)
8.4 mm
Qty: 2